Navigation and Signal Lights Control and Monitoring
AHD-DPS02 A07
Extension Module for Navigation and Signal Light Control and Monitoring System DPS02
AHD-DPS02 A07 is a microprocessor-controlled device used as extension module with 7 channels for control and monitoring of navigation and signal lights with conventional or LED-lamps on board of ships.
Product feature:
- Profile module for installation on standard profile rails in consoles, control panels or control cabinets
- Degree of protection IP 20
- Connected as extension module to basic module AHD-DPS02 G14 with data transmission via external bus for control and monitoring
- Control and monitoring of 7 further lamp circuits
- Input channels are short-circuit-proof and maintenance-free, alarm message on short circuit or wire breakage
- In case of shutdown of electronics, the lamp function remains operative
- Storage of operating time and switching cycles per lamp circuit with message at reaching life-time of lamps (required by regulation for LED-lamps) by basic module AHD-DPS02 G14
- Versions available for 115 or 230 VAC as well as 24 VDC
- Power supply with permanently monitored mains and emergency power supply, selectable by means of external selector switch
- Serial interface for connection of conventional operation panel
- Type approved by Germanischer Lloyd, Lloyd´s Register of Shipping and Russian Maritime Register of Shipping (further approvals on demand)
AHD-DPS02 Com-Modul
Communication Module for Navigation and Signal Light Control and Monitoring System DPS02
The AHD-DPS02 Com-Module is an electronic circuit board for plug-in installation on electronic circuit board of basic module AHD-DPS02 G14. The scope of functions of basic module is extended with CAN-Bus and RS485/RS422 interface for data communication for control and monitoring via PC.
Product feature:
- Plug-in electronic circuit board for integration on electronic circuit board of basic module AHD-DPS02 G14
- Function extension with CAN-Bus and RS485/RS422 interface for data communication for control and monitoring via PC.
- Interfaces connected via terminal list of basic module (COM1 und COM2)
Selector Switch
Selector Switch for Navigation and Signal Light Control and Monitoring System DPS02
Within Navigation and Signal Light Control and Monitoring System DPS02, the power supply of lamp circuits can be switched off or switched on from Mains or emergency power supply source by means of the selector switch.
Product feature:
- Toggle switch for flush mounting installation in consoles, control panels or control cabinets
- 3 switching layers 0 = Off, 1 = Mains supply, 2 = Emergency supply
- Connection on terminal list of basic module AHD-DPS02 G14
AHD-DPS02 B14
Operating Panel for Navigation and Signal Light Control and Monitoring System DPS02, for 14 lamps
The operating panel AHD-DPS02 B14 is a microprocessor-controlled device for conventional operation and status indication of max. 14 navigation and signal lights.
Product feature:
- Compact design for installation in consoles, control panels or control cabinets
- Front dimension 144mm x 144mm
- Degree of protection IP 22 (Front, with front cover IP 54)
- Individual operating push button for switching on and off with integrated LED for status indications of max. 14 navigation and signal lights
- Replaceable text field for designations of lights
- Additional LED-indications for power supply and system faults as well as lamp lifetime warning message (2000 hours remaining)
- Automatic dimming of LED-indications, adjustable
- Integrated alarm buzzer
- Push button for acknowledgement of acoustic alarm with lamp test function
- Push button „Enable“ for selection of operating authorization for the unit
- Serial interfaces for connection to basic module AHD-DPS02 G14
- Type approved by Germanischer Lloyd, Lloyd´s Register of Shipping and Russian Maritime Register of Shipping (further approvals on demand)
AHD-DPS02 B21
Operating Panel for Navigation and Signal Light Control and Monitoring System DPS02, for 21 lamps
The operating panel AHD-DPS02 B21 is a microprocessor-controlled device for conventional operation and status indication of max. 21 navigation and signal lights.
Product feature:
- Compact design for installation in consoles, control panels or control cabinets
- Front dimension 144mm x 144mm
- Degree of protection IP 22 (Front, with front cover IP 54)
- Individual operating push button for switching on and off with integrated LED for status indications of max. 21 navigation and signal lights
- Replaceable text field for designations of lights
- Additional LED-indications for power supply and system faults as well as lamp lifetime warning message (2000 hours remaining)
- Automatic dimming of LED-indications, adjustable
- Integrated alarm buzzer
- Push button for acknowledgement of acoustic alarm with lamp test function
- Push button „Enable“ for selection of operating authorization for the unit
- Serial interfaces for connection to basic module AHD-DPS02 G14 and one extension module AHD-DPS02 A07
- Type approved by Germanischer Lloyd, Lloyd´s Register of Shipping and Russian Maritime Register of Shipping (further approvals on demand)
AHD-DPS02 B42
Operating Panel for Navigation and Signal Light Control and Monitoring System DPS02, for 42 lamps
The operating panel AHD-DPS02 B21 is a microprocessor-controlled device for conventional operation and status indication of max. 42 navigation and signal lights.
Product feature:
- Compact design for installation in consoles, control panels or control cabinets
- Front dimension 288mm x 144mm
- Degree of protection IP 22 (Front, with front cover IP 54)
- Individual operating push button for switching on and off with integrated LED for status indications of max. 42 navigation and signal lights
- Replaceable text field for designations of lights
- Additional LED-indications for power supply and system faults as well as lamp lifetime warning message (2000 hours remaining)
- Automatic dimming of LED-indications, adjustable
- Integrated alarm buzzer
- Push button for acknowledgement of acoustic alarm with lamp test function
- Push button „Enable“ for selection of operating authorization for the unit
- Serial interfaces for connection to basic module AHD-DPS02 G14 and three extension module AHD-DPS02 A07
- Type approved by Germanischer Lloyd, Lloyd´s Register of Shipping and Russian Maritime Register of Shipping (further approvals on demand)
AHD-DPS02 BS
Operating Panel for Navigation and Signal Light Control and Monitoring System DPS02, customer-specific design
Customer-specific designed operating panels AHD-DPS02 BS are microprocessor-controlled devices for conventional operation and status indication of navigation and signal lights.
Product feature:
- Customer-specific design of operating panel for installation in consoles, control panels or control cabinets with arrangement of lights operating elements and inscriptions in tabular or graphically designed front panel
- Individual operating push button for switching on and off with integrated LED for status indications of navigation and signal lights
- Additional LED-indications for power supply and system faults as well as lamp lifetime warning message (2000 hours remaining)
- Automatic dimming of LED-indications, adjustable
- Integrated alarm buzzer
- Push button for acknowledgement of acoustic alarm with lamp test function
- Push button „Enable“ for selection of operating authorization for the unit
- Serial interfaces for connection to basic module AHD-DPS02 G14 and extension modules AHD-DPS02 A07
- Type approved by Germanischer Lloyd, Lloyd´s Register of Shipping and Russian Maritime Register of Shipping (further approvals on demand)
AHD 901 G
Basic Module for Navigation and Signal Light Control and Monitoring System DPS01
AHD 901 G is a microprocessor-controlled device used as basic module for monitoring of mains and emergency power supply and of serial data communication with extension modules AHD 910 A and operating panels of Navigation and Signal Light Control and Monitoring System DPS01.
Product feature:
- Profile module for installation on standard profile rails in consoles, control panels or control cabinets
- Degree of protection IP 20
- Acquisition and processing of status data of up 32 lamp circuits, connected via extension modules AHD 910 A
- Serial data communication with operating and indication panels AHD 406-2D for transmission of lamp status data
- Versions available for lamp voltages from 24 VDC/AC up to 250 V AC
- Power supply with permanently monitored mains and emergency power supply, selectable by means of external selector switch
AHD 901A
Extension Module for Navigation and Signal Light Control and Monitoring System DPS01
AHD 910 A is a microprocessor-controlled device used as extension module with 8 channels for control and monitoring of navigation and signal lights with conventional lamps on board of ships.
Product feature:
- Profile module for installation on standard profile rails in consoles, control panels or control cabinets
- Degree of protection IP 20
- Control and monitoring of 8 lamp circuits
- Max. 4 extension modules AHD 910 A connectable to basic module AHD 901 G for a total of 32 lamp circuits
- Input channels are 2-pole secured by means of fuses (lead fuse or self-resettable semiconductor fuses), alarm signaling in case of short circuit or wire breakage
- In case of shutdown of electronics, the lamp function remains operative
- Versions available for lamp voltages from 24 VDC/AC up to 250 V AC
- Power supply with permanently monitored mains and emergency power supply, selectable by means of external selector switch
- Interface for connection of conventional operation panel
- Serial data transmission of lamp status data to basic module AHD 901 G
AHD 406-2D
Operating and Indication Panel for Navigation and Signal Light Control and Monitoring System DPS01, customer-specific design
Customer-specific designed operating panels AHD 406-2D are microprocessor-controlled devices for conventional operation and status indication of navigation and signal lights.
Product feature:
- Customer-specific design of operating panel for installation in consoles, control panels or control cabinets with arrangement of lights operating elements and inscriptions in tabular or graphically designed front panel
- Standard front dimension144mm x 144mm or 192 mm x 144mm
- Individual operating push button for switching on and off with integrated LED for status indications of navigation and signal lights
- Additional LED-indications for power supply and system faults
- Automatic dimming of LED-indications, adjustable
- Integrated alarm buzzer
- Push button for acknowledgement of acoustic alarm with lamp test function
- Serial interfaces for connection to basic module AHD 901 G and interfaces to extension modules AHD 910 A for lamp control
AHD-POS 10
Navigation Light Monitoring System for 10 Lamp Circuits
AHD-POS 10 is a microprocessor-controlled device for condition monitoring of up to 10 navigation lights of a ship.
Product feature:
- Module with basic plate for surface mounting installation in consoles, control panels or control cabinets
- Degree of protection IP 20
- In- and output terminals for connection of up to 10 lamp circuits
- Connection is performed within lamp circuit between on/off-switch and lamp
- Monitoring of lamp current with alarm signaling in case of lamp failure
- Data transmission of status and alarm data to ship alarm system via CAN-bus including acknowledgement of alarm
- LED-indications for power supply and failure