CCTV – Video Control System
AHD-VDCU 4/4
6.5” Colour Display
AHD 650 resp. AHD 651 colour display for tabular and graphical presentation of data of connected systems (i.e. ship alarm and monitoring system) on multiple visualization pages.
Product feature:
- 6.5” Colour display, remote control optionally available
- Transflective display for best readability even in case of solar radiation
- Compact design for console, panel or switchbox installation
- Degree of protection IP 67 (front side) for in- and outdoor application
- Data communication via CAN bus
- Graphical visualization individually adaptable via configuration software
- Tabular alarm page with all existing alarms
- Automatic dimming of backlight
- Interface for GPS-receiver i.e. for presentation of ship speed over ground.
- Type approved by Germanischer Lloyd and Lloyd´s Register of Shipping (further approvals in progress)
AHD-VDCU 8/8
Remote Control Unit for Colour Displays
Unit with 5 push buttons for remote control of 6.5" colour displays AHD 650 and AHD 651 as well as 8.8" colour displays AHD 880 TC and AHD 880 E except switch on/switch off function.
Product feature::
- Compact design for external installation into consoles, panels or switchboxes
- Degree of protection IP 67 (front side) for in- and outdoor application
- Connection by means of 8-pole connection cable (pluggable on both sides) to remote control interface of colour displays
- 5 integrated control push buttons for remote control of colour displays except switch on/switch off function
- Type approved by Germanischer Lloyd, Lloyd´s Register of Shipping, Det Norske Veritas and Bureau Veritas (further approvals on demand)
AHD-VDCU 16/16
8.8” Touch Screen Colour Display
AHD 880 TC colour display for tabular and graphical presentation of data of connected systems (i.e. ship alarm and monitoring system) on multiple visualization pages.
Product feature:
- 8.8” Colour display with touch screen operation, remote control optionally available
- Transflective display for best readability even in case of solar radiation
- Compact design for console, panel or switchbox installation
- Degree of protection IP 67 (front side) for in- and outdoor application
- Data communication via CAN bus
- Graphical visualization individually adaptable via configuration software
- Tabular alarm page with all existing alarms
- Internal storage of alarm history with date and time
- Applicable as video monitor with camera control functions
- Automatic dimming of backlight
- Interface for GPS-receiver i.e. for presentation of ship speed over ground.
- Type approved by Germanischer Lloyd and Lloyd´s Register of Shipping (further approvals in progress)
AHD-VCS Q 4-1
8.8” Touch screen Engine Colour Display
The AHD 880 E colour display is designed as an engine display with multiple visualization pages for indication and alarm presentation of operating data of connected engine systems.
Product feature:
- 8.8” Colour display with touch screen operation, remote control optionally available
- Transflective display for best readability even in case of solar radiation
- Compact design for console, panel or switchbox installation
- Degree of protection IP 67 (front side) for in- and outdoor application
- Data communication via CAN bus
- Adaption of data protocols like SAE J1939, Modbus, NMEA 0183, NMEA 2000 etc.
- Display is excellently convenient in applications with engine systems of reputable engine manufacturers (MAN, MTU, Caterpillar, Volvo-Penta, Cummins etc.) as well as for expansions and retrofits
- Emergency monitoring page for dual engine systems, which presents engine data of both engines in tabular form in case of malfunction of second engine display
- Interface for GPS-receiver i.e. for presentation of ship speed over ground.
- Type approved by Germanischer Lloyd and Lloyd´s Register of Shipping (further approvals in progress)
15” Touch Screen Colour Display with integrated PC
The colour display AHD 1015 TC combines a display with a visible screen diameter of 15“ with a powerful computer in a common casing and provides with its reduced demand of cabling at minimum demand of space best premises for an efficient visualization of data of connected systems like i.e. ship alarm and monitoring systems.
Product feature:
- 15” Touch screen colour display with integrated PC
- Compact design for installation into control consoles, panels or switchboards
- Degree of protection IP 67 (front side)
- Bright, daylight-qualified display with wide viewing angle for best readability in any ambient light condition
- Automatic dimming of backlight
- High resolution in XGA quality
- Various interfaces for data communication (optionally with video, VGA and DVI-D inputs)
- Use of innovative components without moveable parts (instead of hard discs, fans), providing shock- insensitivity and low noise level
- Passive cooling system
- Type approved by Germanischer Lloyd and Lloyd´s Register of Shipping (further approvals in progress)
19” LED Backlight LCD Colour Display with integrated PC
AHD 1019 is a top-quality product of Böning Automationstechnologie, providing a so-called Panel Computer System. A display with a visible screen diameter of 19“ is combined with a powerful computer in one casing. A sophisticated design concept reduces the demand of cabling at minimum demand of space.
Product feature:
- 19” Colour display with integrated PC as central control- and presentation platform for visualization of any data from connected systems
- Innovative operation concept: Centralized operation of up to 8 display units by one separate control panel
- Integration of control panel i.e. into arm-rest of pilot chair
- Compact design for installation into control consoles, panels or switchboards.
- Degree of protection IP 67 (front side)
- Bright, daylight-qualified display with wide viewing angle for best readability in any ambient light condition
- Manual or automatic dimming of backlight
- High resolution in SXGA quality
- Various interfaces for data communication
- Use of innovative components without moveable parts (instead of hard discs, fans), providing shock- insensitivity and low noise level
- Passive cooling system
- Type test approvals for leading classification societies in progress
AHD-VC 731
Control Unit for Colour Displays and Monitors with Trackball
Display operating panel for operation of Böning 10” to 19” colour displays (panel computer and monitors) with comfortable control of display menus and visualization via trackball as well as operating push buttons in the front panel of the device.
Product feature:
- Compact design for console installation or i.e. integration into arm-rest of pilot chair
- Degree of protection IP 67 (front side)
- Designed for in- and outdoor applications
- Operating elements illuminated and automatically dimmed
- Control of single or multiple displays (in combination with operating panel AHD-DC)
- Data communication with connected system/displays via CAN-bus
Control Unit for Colour Displays AHD 1019 and AHD 919
Unit with keyboard and digital indications for control of operation functions of connected colour displays AHD 1019 and AHD 919.
Product feature:
- Compact design for console installation or i.e. integration into arm-rest of pilot chair
- Degree of protection IP 67 (front side)
- Push buttons and digital indications for selection of colour display and signal source.
- Keyboard with push buttons for cursor control and acknowledgement of acoustic and visual alarm signals
- Automatic LED dimming
- Additional interface for separate joystick
- Data communication with connected system/displays via CAN-bus
Control Unit for Colour Displays and Monitors with Trackball
Display operating panel for operation of Böning 10” to 19” colour displays (panel computer and monitors) with comfortable control of display menus and visualization via trackball as well as operating push buttons in the front panel of the device.
Product feature:
- Compact design for console installation or i.e. integration into arm-rest of pilot chair
- Degree of protection IP 67 (front side)
- Designed for in- and outdoor applications
- Operating elements illuminated and automatically dimmed
- Control of single or multiple displays (in combination with operating panel AHD-DC)
- Data communication with connected system/displays via CAN-bus
Alarm- and Indication System, up to 47 Messages
Kompakt EDA 47 is a microprocessor-controlled device with illuminated and automatically dimmed text fields for up to 47 alarm and status messages of connected data stations.
Product feature:
- Compact design for console, panel or switchbox installation
- Front dimension 192mm x 144mm
- Degree of protection IP 23 (front side, with front cover IP 54)
- 48 illuminated and automatically dimmed text fields (40mm x 10mm), thereof max. 47 in free use
- Text field illumination depending on measuring point type provided with each 2 green, red or yellow Multi-LED-Chip (16 integrated LED´s). Unused fields are darkened deep black
- Individual measuring point text (only text) on common film negative, low costs for inscription
- Each message can be programmed as alarm or status indication
- 5 inputs for blocking (release) of any other message
- On- and off-delay in range of 1 to 99 s
- Data communication via serial interfaces, low demand for cabling
- Connection via ribbon flat cable and connection module (included in scope of delivery)
- Integrated buzzer
- One relay output each for horn and common alarm message
- Type approved by Germanischer Lloyd (further approvals on demand)
Group Alarm Panel, 10 Alarm Groups
AHD 406H is a microprocessor-controlled device, applied as group alarm and indication panel i.e. within ship alarm and monitoring systems.
Product feature:
- Compact design for console, panel or switchbox installation
- Front dimension 72mm x 144mm
- Degree of protection IP 20 (front side, with front cover IP 44)
- Available with single LED indicators or illuminated and automatically dimmed text field for dark rooms, text field as common film negative for easy replacement
- Acquisition of up to 144 single messages via three serial inputs (transmitted i.e. from KOMPAKT EDA 47 systems)
- Creation of max. 10 freely programmable groups (each single message may activate up to 2 groups)
- Each group can be programmed as alarm or indication
- Creation of max. 6 sub groups, which are available as relay contacts (potential free change over contact) on 50-pole connection module (included in scope of delivery)
- Internal printer control with transmission of up to 144 text messages and max. 32 characters/text
- 2 serial outputs for control of cabin- and mess room alarm panel
- One relay output each for horn and common alarm message, 6 sub group relays
- Connection via ribbon flat cable and 50-pole connection module (included in scope of delivery)
- Integrated Engineer Call function
- Type approved by Germanischer Lloyd (further approvals on demand)
Alarm Monitoring and Control Unit, 10 Binary Inputs
AHD 406 is a microprocessor-controlled device, applied as alarm and indication panel i.e. within ship alarm and monitoring systems.
Product feature:
- Compact design for console, panel or switchbox installation
- Front dimension 72mm x 144mm
- Degree of protection IP 20 (front side, with front cover IP 44)
- Available with single LED indicators or illuminated and automatically dimmed text field for dark rooms, text field as common film negative for easy replacement
- 10 measuring point inputs, thereof 8 binary and 2 binary or analog
- 1 input for alarm blocking
- 3 Group relays, 1 horn relay
- 1 serial output
- Connection via ribbon flat cable and 50-pole connection module (included in scope of delivery)
On Duty/Engineer Call Panel
The AHD-PS 15B is a monitoring and control device, which is used for selection of personnel on duty within Duty Alarm/Engineer Call System on board of ships, which are classified for all or temporarily unmanned machinery room.
Product feature:
- Compact design for console, panel or switchbox installation
- Front dimension100mm x 130mm, installation depth 55mm
- Degree of protection IP 20
- Selector switches with appropriate single LED indication for selection of “Engine Room manned/unmanned” and for up to 5 engineers on duty as well as engineer call
- input for external engineer call
- Data communication with central unit AHD 882 via serial interface
- Type approved by Germanischer Lloyd and Lloyd´s Register of Shipping (further approvals on demand)
Cabin Duty Alarm/Engineer Call Panel
The AHD 406-2 is a monitoring device, which is used as a cabin or mess room panel in Duty Alarm/Engineer Call System on board of ships, which are classified for all or temporarily unmanned machinery room.
Product feature:
- Compact design for wall built-in installation, front dimension 72mm x 144mm
- Low installation depth of only 26mm
- Degree of protection IP 66 (front side, rear side IP 20)
- Creation of max 15 alarm groups from measuring points of connected alarm and monitoring systems
- Single LED indication for each alarm group in front panel, automatically dimmed
- Alarm group text field as common film negative for easy replacement
- Data communication with central unit AHD 882 via serial interface
- Galvanically isolated and independently operating binary inputs for fire alarm and engineer call message, each with appropriate LED-indication and integrated buzzer
- Acknowledgement push button for acoustic alarm
- Type approved by Germanischer Lloyd and Lloyd´s Register of Shipping (further approvals on demand)
Alarm and Indication Panel
AHD 530 is a microprocessor-controlled device, applied as alarm and indication panel i.e. within ship alarm and monitoring systems.
Product feature:
- Compact design for console, panel or switchbox installation
- Front dimension 72mm x 144mm
- Degree of protection IP 20 (front side, with front cover IP 44)
- 9 measuring points with illuminated and automatically dimmed text field, text field as common film negative for easy replacement
- Data communication with ship alarm and monitoring system via serial interface
Alarm and Safety System, 11 Binary Inputs
AHD 414 A is a microprocessor-controlled device with 11 binary inputs for alarm and status messages and is applicable as alarm or safety system.
Product feature:
- Compact design for console, panel or switchbox installation
- Front dimension 144mm x 144mm
- Degree of protection IP 54 (front side)
- LED-indications for each measuring point with individual text as well as push buttons for acknowledgement integrated in front plate (External acknowledgement via terminal list)
- Input delay up to 99 s
- 1 input for alarm blocking
- Override function
- 3 freely programmable group relays and one horn relay
- 24-pole pluggable terminal list
- Wire breakage monitoring for sensor and stop circuit (safety system)
- Data communication via serial interface
- Type approved by Germanischer Lloyd, Lloyd´s Register of Shipping, Det Norske Veritas, Bureau Veritas, American Bureau of Shipping, Russian Maritime Register of Shipping (further approvals on demand)
Spill Warning Gauge for Ship Alarm Systems
The spill warning gauge AHD-SW I display the content of a fuel oil tank by means of an LED-scale and supports environmental protection by activation of acoustic and optic alarm on impending fuel spilling during bunker procedure.
Product feature:
- Spill warning gauge for one fuel oil tank
- Built-in housing with weather-proof, robust design for outdoor use on deck
- Degree of protection IP 67
- Installation of several gauges per tank possible
- Serial data communication with data station AHD-SAS 15, which records and transmits the tank level content
- LED-scale for tank level display
- Interval warning tone and flashing yellow LED indication at 95% tank level
- Steady warning tone and flashing red LED indication at 100% tank level
- Clearly audible warning tone in outdoor area
- Warning message is transmitted to data station AHD-SAS 15
- Muting of acoustic alarm by means of integrated push button within gauge
Spill Warning Gauge for Ship Alarm Systems
The spill warning gauge AHD-SW II displays the content of two fuel oil tanks independently, each by means of an LED-scale and supports environmental protection by activation of acoustic and optic alarm on impending fuel spilling during bunker procedure.
Product feature:
- Independently operating spill warning gauge for two fuel oil tanks
- Built-in housing with weather-proof, robust design for outdoor use on deck
- Degree of protection IP 67
- Installation of several gauges per tank possible
- Serial data communication with data station AHD-SAS 15, which records and transmits the tank level content
- LED-scale for tank level display
- Interval warning tone and flashing yellow LED indication at 95% tank level
- Steady warning tone and flashing red LED indication at 100% tank level
- Clearly audible warning tone in outdoor area
- Warning message is transmitted to data station AHD-SAS 15
- Muting of acoustic alarm by means of integrated push button within gauge
AHD-VSC CF
AHD-VSC QC
AHD-VC VR8